document number: 26021 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 17-jun-10 1 ac and pulse film/foil capacitors radial potted type kp 1836 vishay roederstein dimensions in millimeters main applcations high voltage, very high curr ent and high pulse operations, deflection circuits in tv sets (fly-back tuning). electronic ballasts, protection circuits in smps?s. snubber and scr commutating circuits. marking manufacturer's logo, type, c-va lue, rated voltage, tolerance, data of manufacture dielectric polypropylene film electrodes aluminum foil coating flame retardant plastic case (ul-class 94 v-0), epoxy resin sealed. costruction extended aluminum foil, internal series connection, double-sided metallized, polyester carrier film insulation resistance measured at 500 v dc after one minute 100 000 m ? minimum value, (1000 g ? typical value) features ? compliant to rohs directive 2002/95/ec leads tinned wire iec test classification 55/100/56 according to iec 60068 operating temperature range - 55 c to + 100 c capacitance range 100 pf to 0.22 f capacitance tolerances 10 % (k), 5 % (j) rated voltages 630 v dc , 1000 v dc , 1250 v dc , 1600 v dc , 2000 v dc permissible ac voltages (rms) up to 60 hz 300 v ac , 350 v ac , 400 v ac , 500 v ac , 600 v ac test voltages (electrode/electrode) 2 x u r for 2 s temperature coefficient - 250 x 10 -6 /c (typical value) capacitance drift up to + 40 c, 0.5 % for a period of two years derating for dc and ac category voltage uc at + 85 c: u c = 1.0 u r at + 100 c: u c = 0.7 u r self inductance ~ 6 nh measured with 2 mm long leads pull test on leads ? 30 n in direction of leads according to iec 60068-2-21 reliability operational life > 300 000 h failure rate < 1 fit (0.5 x u r and 40 c) for further details, please refer to the general information available at www.vishay.com/doc?26033 w? d ? 16 1.0 < 16.0 0.8 l max. 0.6 pcm 0.4 0.4 ? d w max. marking h max. 6.0 -1
kp 1836 vishay roederstein ac and pulse film/foil capacitors radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 26021 2 revision: 17-jun-10 maximum pulse rise time note ? if the maximum pulse voltage is less than the ra ted voltage higher dv/dt values can be permitted. dissipation factor tan ? note ? further c-values upon request. pcm (mm) maximum pulse rise time dv/dt [v/s] 630 v dc 1000 v dc 1250 v dc 1600 v dc 2000 v dc 15 6500 8200 11 100 13 900 13 900 22.5 2600 3200 4600 6000 9800 27.5 1800 2300 3100 4000 6000 37.5 1200 1500 1900 2400 3500 measured at c ? 0.1 f c > 1.0 f 1 khz 0.3 x 10 -3 0.3 x 10 -3 10 khz 0.4 x 10 -3 0.4 x 10 -3 100 khz 1 x 10 -3 - maximum values capacitance capacitance code voltage code 63 630 v dc /300 v ac voltage code 10 1000 v dc /350 v ac voltage code 12 1250 v dc /400 v ac w h lpcmw h lpcmw h lpcm 100 pf -110 - - - - - - - - - - - - 150 pf -115 - - - - - - - - - - - - 220 pf -122 ------------ 330 pf -133 ------------ 470 pf -147 - - - - - - - - - - - - 680 pf -168 - - - - - - - - - - - - 1000 pf -210 ------------ 1200 pf -212 - - - - - - - - 5.5 10.5 18.0 15 1500 pf -215 - - - - - - - - 5.5 10.5 18.0 15 1800 pf -218 - - - - 5.5 10.5 18.0 15 6.5 12.5 18.0 15 2200 pf -222 - - - - 5.5 10.5 18.0 15 6.5 12.5 18.0 15 2700 pf -227 5.5 10.5 18.0 15 6.5 12.5 18.0 15 7.5 13.5 18.0 15 3300 pf -233 5.5 10.5 18.0 15 6.5 12.5 18.0 15 7.5 13.5 18.0 15 3900 pf -239 6.5 12.5 18.0 15 7.5 13.5 18.0 15 6.5 14.5 26.5 22.5 4700 pf -247 6.5 12.5 18.0 15 7.5 13.5 18.0 15 6.5 14.5 26.5 22.5 5600 pf -256 7.5 13.5 18.0 15 8.5 14.5 18.0 15 6.5 14.5 26.5 22.5 6800 pf -268 7.5 13.5 18.0 15 8.5 14.5 18.0 15 6.5 14.5 26.5 22.5 8200 pf -282 8.5 14.5 18.0 15 6.5 14.5 26.5 22.5 57.5 15.5 26.5 22.5 0.01 f -310 8.5 14.5 18.0 15 6.5 14.5 26.5 22.5 7.5 15.5 26.5 22.5 0.012 f -312 8.5 17.5 18.0 15 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 0.015 f -315 10.5 17.5 18.0 15 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 0.018 f -318 7.5 15.5 26.5 22.5 8.5 16.5 26.5 22.5 11.0 21.0 26.5 22.5 0.022 f -322 7.5 15.5 26.5 22.5 8.5 16.5 26.5 22.5 11.0 21.0 26.5 22.5 0.027 f -327 8.5 16.5 26.5 22.5 10.5 18.5 26.5 22.5 11.0 21.0 31.0 27.5 0.033 f -333 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 11.0 21.0 31.0 27.5 0.039 f -339 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 13.5 23.5 31.5 27.5 0.047 f -347 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 13.5 23.5 31.5 27.5 0.056 f -356 11.5 20.5 31.5 27.5 12.5 22.5 41.5 37.5 12.5 23.5 41.5 37.5 0.068 f -368 11.5 20.5 31.5 27.5 12.5 22.5 41.5 37.5 12.5 22.5 41.5 37.5 0.082 f -382 11.5 20.5 31.5 27.5 12.5 22.5 41.5 37.5 14.5 24.5 41.5 37.5 0.1 f -410 13.5 23.5 31.5 27.5 14.5 24.5 41.5 37.5 14.5 24.5 41.5 37.5 0.12 f -412 12.5 22.5 41.5 37.5 14.5 24.5 41.5 37.5 16.0 28.5 41.5 37.5 0.15 f -415 12.5 22.5 41.5 37.5 16.0 28.5 41.5 37.5 16.0 28.5 41.5 37.5 0.18 f -418 14.5 24.5 41.5 37.5 16.0 28.5 41.5 37.5 20.0 40.0 42.5 37.5 0.22 f -422 14.5 24.5 41.5 37.5 18.0 32.5 41.5 37.5 20.0 40.0 42.5 37.5
document number: 26021 for technical questions, contact: dc-film@vishay.com www.vishay.com revision: 17-jun-10 3 kp 1836 ac and pulse film/foil capacitors vishay roederstein recommended packaging note (1) s = box size 55 mm x 210 mm x 340 mm (w x h x l) (2) l = box size 60 mm x 360 mm x 510 mm (w x h x l) note ? further c-values upon request. letter code type of packaging height (h) (mm) reel diameter (mm) ordering code examples pcm 15 pcm 22.5 to 27.5 pcm 37.5 d ammo 16.5 s (1) kp 1836-168/205-d x - - g ammo 18.5 s (1) kp 1836-168/205-g x - - f reel 16.5 350 kp 1836-168/205-f x - - w reel 18.5 350 kp 1836-168/205-w x - - v reel 18.5 500 kp 1836-310/134-v x x - g ammo 18.5 l (2) kp 1836-310/134-g - x - - bulk - - kp 1836-310/134 x x x capacitance capacitance code voltage code 13 1600 v dc /500 v ac voltage code 20 2000 v dc /600 v ac wh lpcmwh lpcm 100 pf -110 - - - - 5.5 10.5 18.0 15 150 pf -115 - - - - 5.5 10.5 18.0 15 220 pf -122 - - - - 5.5 10.5 18.0 15 330 pf -133 - - - - 5.5 10.5 18.0 15 470 pf -147 - - - - 5.5 10.5 18.0 15 680 pf -168 5.5 10.5 18.0 15 5.5 10.5 18.0 15 1000 pf -210 5.5 10.5 18.0 15 6.5 14.5 26.5 22.5 1200 pf -212 6.5 12.5 18.0 15 6.5 14.5 26.5 22.5 1500 pf -215 6.5 12.5 18.0 15 6.5 14.5 26.5 22.5 1800 pf -218 6.5 14.5 26.5 22.5 6.5 14.5 26.5 22.5 2200 pf -222 6.5 14.5 26.5 22.5 6.5 14.5 26.5 22.5 2700 pf -227 6.5 14.5 26.5 22.5 7.5 15.5 26.5 22.5 3300 pf -233 6.5 14.5 26.5 22.5 7.5 15.5 26.5 22.5 3900 pf -239 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 4700 pf -247 7.5 15.5 26.5 22.5 10.5 18.5 26.5 22.5 5600 pf -256 8.5 16.5 26.5 22.5 10.5 18.5 26.5 22.5 6800 pf -268 8.5 16.5 26.5 22.5 11.5 20.5 31.5 27.5 8200 pf -282 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 0.01 f -310 10.5 18.5 26.5 22.5 11.5 20.5 31.5 27.5 0.012 f -312 11.5 20.5 31.5 27.5 13.5 23.5 31.5 27.5 0.015 f -315 11.5 20.5 31.5 27.5 13.5 23.5 31.5 27.5 0.018 f -318 11.5 20.5 31.5 27.5 15.0 24.5 31.5 27.5 0.022 f -322 11.5 20.5 31.5 27.5 15.0 24.5 31.5 27.5 0.027 f -327 13.5 23.5 31.5 27.5 14.5 24.5 41.5 37.5 0.033 f -333 13.5 23.5 31.5 27.5 14.5 24.5 41.5 37.5 0.039 f -339 12.5 22.5 41.5 37.5 16.0 28.5 41.5 37.5 0.047 f -347 12.5 22.5 41.5 37.5 16.0 28.5 41.5 37.5 0.056 f -356 14.5 24.5 41.5 37.5 - - - - 0.068 f -368 14.5 24.5 41.5 37.5 - - - - 0.082 f -382 16.0 28.5 41.5 37.5 - - - - 0.1 f -410 16.0 28.5 41.5 37.5 - - - - 0.12 f -412 - - - - - - - - 0.15 f -415 - - - - - - - - 0.18 f -418 - - - - - - - - 0.22 f -422 - - - - - - - -
kp 1836 vishay roederstein ac and pulse film/foil capacitors radial potted type www.vishay.com for technical questions, contact: dc-film@vishay.com document number: 26021 4 revision: 17-jun-10 recommended packaging note (1) s = box size 55 mm x 210 mm x 340 mm (w x h x l) (2) l = box size 60 mm x 360 mm x 510 mm (w x h x l) letter code type of pac kaging height (h) (mm) reel diameter (mm) ordering code examples pcm 15 pcm 22.5 to 27.5 pcm 37.5 d ammo 16.5 s (1) kp 1836-168/205-d x - - g ammo 18.5 s (1) kp 1836-168/205-g x - - f reel 16.5 350 kp 1836-168/205-f x - - w reel 18.5 350 kp 1836-168/205-w x - - v reel 18.5 500 kp 1836-310/134-v x x - g ammo 18.5 l (2) kp 1836-310/134-g - x - - bulk - - kp 1836-310/134 x x x 2 70 0 47 0 0 0.0 1 0.0 2 7 0.1 0.22 0.047 permissible ac voltage vs. frequency 1000 7 5 3 2 100 7 5 3 2 10 f [hz] 630 v dc capacitance in pf and f v rms 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 0 .0 1 0 .0 4 7 0 .1 0.22 2200 4700 0.022 permissible ac v oltage vs. frequency 1000 7 5 3 2 100 7 5 3 2 10 f [hz] 1000 v dc capacitance in pf and f v rms 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 1 2 0 0 4700 2200 0.01 0.047 0 .0 2 2 0 .2 2 0 .1 permissible ac v oltage vs. frequency 1000 7 5 3 2 100 7 5 3 2 10 f [hz] 1250 v dc capacitance in pf and f v rms 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 150 470 1000 2200 4700 0.01 0.022 0.047 0.1 permissible ac vo ltage vs. frequency 1000 7 5 3 2 100 7 5 3 2 10 f [hz] 1600 v dc capacitance in pf and f v rms 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 1 00 0 470 1 5 0 2200 4700 0 .0 1 0 .0 2 2 0 .0 4 7 permissible ac v oltage vs. frequency 1000 7 5 3 2 100 7 5 3 2 10 f [hz] 2000 v dc capacitance in pf and f v rms 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
